Thursday, February 23, 2017

My Biggest Custom Order Yet - White Oak Trestle Table



This is without a doubt my most involved woodworking project yet. While I have built more complex pieces of furniture, this table required a lot of resources to be called on. It started as a request from a good customer, inquiring about having a table built. It's purpose was to be a feature piece in a cabin that they where restoring. Along with this trestle table, I also crafted a 8 foot farm table and benches as part of the same order. While I had about 4 months to complete the order, I literally sprayed the lacquer finish on the base about an hour before delivery. 



This table is made from white oak, sourced from a local tree service. The tree yielded 3 nice logs. Lumber was milled from the logs using a band saw mill, with the majority being quarter-sawn. This is a very labor intensive process, even with a fully hydraulic mill. First the log is sliced length wise into four even pieces, like a pie. Then boards are taken off each face of these quarters alternating between faces. This yields some of the most beautiful and stable lumber available with growth rings running straight down the board. It is stable in that it expands and contracts across it's thickness, not it's width which reduces cupping and warping. 



The lumber for the table top was dried in an electric kiln for about 2 months. While the larger dimension lumber for the base continued to dry, I got started with the table top. I planed the heavy boards with the help of the sawyer and my father in a helical head planer to about 2 inches. The top is so large and heavy that I could not make it in my small basement shop. I ended up renting out space in a warehouse for one week, and boy was it a good idea. For jointing the boards in preparation for gluing them into a 12 by 4 foot slab, I “jointed” their edges with my Festool track saw. To get a perfect cut, I used a brand new blade and it did indeed come out perfect. The table top was first glued up into two halves, then joined into the final slab. For aligning the boards and two halves I used 8mm domino tenons, cutting the mortises with my Festool XL 700 which was specifically purchased for this project. Luckily it has made things much easier and faster in the shop since on a variety of projects. After picking up the lumber for the base, I jointed and planed the lumber with a jointer and planer in the rented space but built the structure in my own shop. I built up the center post of the trestle out of two pieces, this was done to make sure the lumber used would dry faster with less chance of splitting. All the joinery in this piece was fairly simple thanks to my domino joiner. The balance of the joints were traditional mortise and tenons, a saddle joint of sorts and large screws. While simple using the domino joiner, the joinery for this project would have been massively time consuming and complicated if it would have been done totally traditional, I can't say enough about how great an asset XL-700 is in my shop. With all the pieces and parts of the base fabricated, I glued them together using Tightbond 3 wood glue. I used a variety of clamps throughout this project, from quick grips, pipe and band clamps. Thankfully the glue up went smooth. I stained the table using Minwax Jacobean. After staining the base I added bracing to the trestles, this was more decorative than structural, even though it does add a large amount of strength. These pieces where added after staining for ease of assembly and staining. I used large counter sunk wood screws, lubricating the treads with Vaseline. This keeps the screw moving and avoids snapping off the head. Both the base and the table top where finished with M.L. Cambell Pre-Catalyzed Lacquer which dries almost immediately. I sprayed on 3ish coats sanding in between with 220 grit paper. Once fully dry I rubbed out the finish to an even satin sheet with 3M finishing pads.
This was quite the project and one that I would question doing again. With that said, it was a great experience and I happy I built the table. The customer was very happy with the table and the fact that they got it in time for the cabins debut.

Here's The Full Video!







I'll also be producing a series of videos about this project, where I go over in more detail certain aspects of the build. This will be done over several videos posted over the next few weeks. If you have any questions in the meantime, let me know. Thank you all for you time and support. If you have any friends or family you can share the video with, I would greatly appreciate it.

Amazon Affiliate Links for Tools and Products used in this video, click for prices and details.

Festool XL 700- http://amzn.to/2ldxmL6
Festool Tracksaw- http://amzn.to/2mc09nu
Knockoff Festool Blade- http://amzn.to/2lKjmeX  (36 tooth)

22 comments:

  1. is there a plan available for this 12 ft oak trestle table

    ReplyDelete
    Replies
    1. Not at the moment, but perhaps in the future.

      Delete
    2. That would be great!
      When will "in the future" be? ;-)

      Delete
  2. Hi there. First off this table is the inspiration for the table I'm building for my family. I was just wondering as the width of the legs to the top. As in the legs are x and the top is x? If I need to buy the plans I will. Thanks in advance

    ReplyDelete
  3. that offer sofas also offer a wide range of other home furnishings. For mattresses and bed frames see my post on mattresses and bedding.
    Sydney Commercial Furniture

    ReplyDelete
  4. When making utilization of band saw cutting edges ensure that the hardware is by and large accurately utilized and kept up amid the life of the item. Doing this will help ensure and support security when making utilization of the band saw sharp edges and will make them be more effective in cutting. I find this very good website for the scroll saw for sale, If you want you can visit this site.

    ReplyDelete
  5. OMG That tressle table is awesome. I am going to build one just like that 16 ft long.
    How wide is it?

    ReplyDelete
  6. This style of furniture works magnificently in extensive vaporous spaces with intense or normal divider covers and beautiful lighting. CutTheWood.com

    ReplyDelete
  7. Wonderful post, Which you have shared here about the White Oak Trestle Table. Your video is very interesting and I liked your way to share your good experience here. Furniture Store Victoria BC

    ReplyDelete
  8. It was really insightful.
    Thanks for such a nice content.
    Cheers
    BTW if anyone interested more have a look sawfinder.com thanks

    ReplyDelete
  9. This was amazing build...
    Really nicely done,

    ReplyDelete
  10. 2 K@@L 4 SK@@L :) Enjoyed the video. Stunning table, hope to see many more of your projects.

    ReplyDelete
  11. If you want to pay a fraction of the price for performance that’s almost as good as that of the best pruners out there, you can find Anvil Pruning Shears. Want to buy, Check it Now!

    ReplyDelete
  12. This is very helpful for me.Thanks for sharing this tips.I egarly waitting for net updates.
    commercial patio furniture

    ReplyDelete
  13. Apakah anda membutuhkan pompa pabrik kelapa sawit? kami adalah distributor resmi yang menyediakan pompa pabrik kelapa sawit, pompa centrifugal, gear pump dan steam valves serta screw compressor. Hubungi kami segera

    https://www.victorindogroup.com

    ReplyDelete
  14. The Dark Net is where the 'bad guys' hang out and you can make some cash from them. Some of these web links can lead you to websites with hidden costs in there that you may not know about until you get your hands on a program that helps you find these companies. There are many ways to find these businesses on the dark web links, and one of them is using search engines. Many of these search engine companies will help you track down the sites you need to get to for a small fee.

    ReplyDelete
  15. The information which you have provided is very good and essential for everyone. Keep sharing this kind of information. Thank you. Patio furniture Canada

    ReplyDelete
  16. I generally want quality content and I found that in your post. The information you have shared about Office Furniture Waco Tx.is beneficial and significant for us. Keep sharing these kinds of articles here. Thank you.

    ReplyDelete
  17. I am wondering how you fastened the table top to the legs? I am currently making a 40" x 10' trestle table out of white oak and thinking of just a single floating tendon in the middle of each top support, gravity.

    ReplyDelete